NEWS
NEWS
Current News | Archives
Inspiration Intersects 0.276% NI over 33.30M
FOR IMMEDIATE RELEASE
| August, 29 2008 | TSX - ISM Frankfurt- OI8 |
Toronto, Ontario
- Inspiration Mining Corporation (the “Corporation”) is pleased to announce the results of the continuation of their diamond drilling program on its Langmuir Project, located in Langmuir Township south of Timmins, Ontario. The Langmuir Property consists of 69 unpatented contiguous mining claim units covering approximately 1090 hectares in the north-central portion of Langmuir Township, Porcupine Mining Division, and District of Cochrane, Ontario. The property is approximately 25 km southeast of Timmins, Ontario, and hosts the past producing Langmuir No.1 Mine, and majority of the past producing Langmuir No. 2 Mine.Inspiration is continuing the drilling at the Langmuir Project – Langmuir No.2 Mine – North Zone. The detail fill-in drill program is designed to complete the definition of the nickel bearing mineralization below the 100 metre level.
The following table indicates the drill information for the North Zone drill holes:
| Drill Hole | Grid Northing (metres) | Grid Easting (metres) | Dip | Azimuth (Geodetic) | Section Northing (metres) | Section Easting (metres) | Length (m) |
| LN08-115 | 2983.5 | 2034.07 | -67.37 | 301.05 | 3600.82 | 269.8 | 371.73 |
| LN08-116 | 2983.48 | 2034.12 | -70.8 | 298.48 | 3600.82 | 269.86 | 408.82 |
| LN08-117 | 2983.31 | 2034.43 | -76.98 | 298.52 | 3600.84 | 270.21 | 558.49 |
Drill holes LN08-115 to LN08-117 inclusively were completed on the same drill setup located approximately 102 metres east of previously released drill holes LN08-109 and LN08-110 in the southern portion of the North Zone and were designed to follow the down plunge nickel mineralization from previously release drill holes.
Drill hole LN08-115 intersected wide nickel mineralization, which may be the halo of the zone intersected in previously released drill holes LN08-107 (0.526% Ni over 34.81m and containing 1.024% Ni over 9.95m, true width) and LN08-108 (0.917% Ni over 17.75m and containing 1.058% Ni over 12.02m, true widths).
Drill hole LN08-116 approximately 60 metres down dip from hole LN08-115 did not intersect the zone or halo nickel mineralization and may be beneath the plunge of the zone intersected in holes LN08-107 and LN08-108.
Drill hole LN08-117 intersected 3 smaller zones of nickel mineralization beneath the plunge of the zone intersected in holes LN08-107 and LN08-108. These zones, ranging in true widths from 5.63m to 1.29m are approximately 453 metres to 505 metres vertically below surface.
The following assay results for drill holes LN08-115 to LN08-117 at the Langmuir No.2 Mine – North Zone have been received, compiled and condensed to the following:
| Drill Hole | From (m) | To (m) | Core Length (m) | True Width (m) | Core Length (ft) | True Width (ft) | Weighted Average Ni (%) | |
| LN08-115 | 311.7 | 363.5 | 51.8 | 33.3 | 169.95 | 109.25 | 0.276 | |
| and contains | ||||||||
| 311.7 | 312.7 | 1 | 0.64 | 3.28 | 2.1 | 0.547 | ||
| 344.5 | 348.1 | 3.6 | 2.31 | 11.81 | 7.58 | 0.457 | ||
| and | ||||||||
| 370.25 | 371 | 0.75 | 0.48 | 2.46 | 1.57 | 0.51 | ||
| LN08-116 | 371 | 380 | 9 | 5.16 | 29.53 | 16.93 | 0.213 | |
| LN08-117 | 466 | 476.94 | 10.94 | 5.63 | 35.89 | 18.47 | 0.237 | |
| and | ||||||||
| 501.4 | 505.3 | 3.9 | 2.01 | 12.8 | 6.59 | 0.436 | ||
| and | ||||||||
| 520.6 | 524 | 3.4 | 1.75 | 11.15 | 5.74 | 0.564 | ||
| and contains | ||||||||
| 521.5 | 524 | 2.5 | 1.29 | 8.2 | 4.23 | 0.658 | ||
| or | 521.5 | 522.6 | 1.1 | 0.57 | 3.61 | 1.87 | 0.94 |
The nickel bearing sulphide mineralization, with estimations ranging from 1% to 20% fine-graineddisseminatations up to massive 100% sulphides, is contained within serpentenized komatiitic ultramaftic extrusive flows with occasional spinifex texture.
The assaying technique used is the industry standard for base metal assaying, which uses nitric and hydrochloric acids that extracts nickel only from sulphide mineralization and not from nickel silicate minerals.
The assaying of split core samples was conducted by Swastika Laboratories, and included the insertion of blanks and standards. The Qualified Person in charge of the Langmuir Project and the person who prepared the technical data in this release is Kian Jensen, B.Sc., P.Geo. (Ont), who is an arm's length party retained by the Company to carry out its exploration program on the Langmuir Project.
For further information, please contact Randy Miller, President of the Company, at tel: 416-842-9000, www.inspirationmining.com
For Investor Relations call:
Gale Capital Corporation
Ph. 604.221.7604
Fax 604.221.7606
galecapital@shaw.ca
The TSX has not reviewed and does not accept responsibility for the adequacy or accuracy of this release.